Epson TM-U220 Support Page
DIP Switch Settings
Models TM-U220 (US Models)
Note: turn off the printer before changing switch
settings.
Serial Interface
Parallel, USB, Ethernet, Wireless Interface
Installing
Interfaces For instructions on installing or configuring a Connect-It interface card please choose from the list below:
Windows Drivers Installing the Device Drivers
for Windows
To obtain the latest Device
Drivers from Epson:
-
Download and Install Epson’s
drivers available from
www.epson.com
-
Click on TECHNICAL RESOURCES
-
Select the printer model under the menu
-
Click the download
drivers on the printer page
|
Troubleshooting
Problem: Printer turns on but won't grip or feed paper.
There are 2 wire clips on either side of the ribbon cage that holds the paper
against the print bar.
Sometimes in shipping they pop off. They are easy to check and reseat if they
have come off.
Here’s how to check:
1> Open both front and back clamshell covers of printer
2> Locate the wire clips on either side of the ribbon case (see clip off diagram
below)
3> Check to see that the clip is behind the metal stop (see clip on diagram
below)
4> If it has come off on either side it can be put back in place using a flat
blade screw driver
5> Close covers and try printing again
More printer troubleshooting...
|