FlashPrint
bright LED light strip flashes whenever paper is printed
Now you can add flashing light option to a new or existing POS
buzzer. Every time a paper is printed the bright LED light strips
flashes for a moment
Bright white light is readily visible and brings attention to the item
printed.
To install simply plug into one of the two open jacks on the
print buzzer.
Can be used by itself by plugging directly into the back of the
printer and setting the printer up as
detailed here.
Light is powered by the printer, no power supply needed.
Light strip can be applied to any smooth service up to 14' away
from the printer.
Light strip can be cut to shorten to desired length or you can
use the full 16' length.
Flash duration is fixed.
Cannot be used in conjunction with a print buzzer and the
paper sensor.
Specifications:
Voltage: 24V DC
Watts: 50
Length: 5m (16.4 ft.)
Width: 8mm
Color temp: 4000K
Storage Temp: -40C to 80C
Operating Temp -25C to 60C
Installation surface must be smooth clean and dry for proper
adhesion of the strip.
The strip can be cut along any of the cutting lines which occur
every 1.6 inches.
Indoor use only
Comes Complete with 16' of adhesive light strip, 14 ft extension
cable, instructions.
