|
|
| External Buzzer for Epson Printers Model TM-T88V, TM-T20 and m30. This is an external buzzer for certain Epson receipt printers. Plugs into drawer port,
sounds alarm when paper is cut. Model OT-BZ20-634, Epson P/N C32C890634
Powered by the printer, the buzzer includes a
volume control and adhesive patch for printer mounting. It can be configured
using the Epson printer utility, and includes multiple alarm options and can
plays a variety of tones which allows you to tell which station is printing.
Caveats: For use
only with Epson TM-T88V/VI/VII, TM-T20 and
TM-m30. Cannot be used in conjunction with a cash drawer. If you are
looking for a buzzer to be used with other printers or you are also using
a cash drawer see
our cash drawer alarm |
- Native support in Epson driver - simple installation
- Plays a variety of tones to allow quick identification
- Built-in volume control - loud or soft buzz
|
|
This buzzer works only on Epson
model TM-T88V, TM-T88VI, TM-T88VII, TM-T20 and TM-m30 printers.
For all other models, including
TM-T88III, TM-T88IV and TM-U220, use the
POS buzzer |
Setup
 |
The buzzer simply plugs into back of the printer. It
must be enabled using the Epson printer utility.
To install, plug the buzzer into the drawer kick (DK) port on the
printer. The buzzer can be mounted on the side or back of the printer
using the adhesive square (included). |
|
Product Manual |
Setup is done using
the TM setup utility included with the printer.
Setting the buzzer
Select the Optional Buzzer, from the menu. The buzzer can be made
to buzz when ever something is printed (after the cut), when cash drawer 1 is
opened (2 pin), or cash drawer 2 is sent a signal to open. You can select
different tones for each alarm and adjust the volume on the buzzer itself.
 |
|
